Drystick Extra Drystick Extra is an easy printing, water-based, pressure sensitive adhesive. Stickers/Labels Drystick Extra permits repeated removal and refixing of printed stock on most surfaces. The following points should be observed in use: • Surface to be labelled should be clean and free from dust or grease.

• Adhesive on the back of the sticker should be protected from dust and excessive fingering.

• Rigid plastics should be stored flat as a strong curl will weaken adhesion.

Drystick Extra is extremely effective on most printed and unprinted plastics and metal foils, and on most hard, non-porous paper and board. It is resistant to the effect of residual ink solvents and to discolouration.

Drying Jet drying: 70°C, 30-60 seconds. Air drying: 1 hour. When air drying leave prints for 2-3 hours before applying silicone release paper.

Thinning & Wash-up Ready to print. Where frequent removability is required, thin 10% with water. Wash up with water. If Drystick Extra has set use Seriwash Universal Screen Wash.