Solvent Resistant Filler (Blue / Green) – For use with Plastisol and solvent based inks.
 

Water Resistant Filler (Red) – For use with water based inks

Screen Filler can be used for spotting out and for masking open areas.

Masking Open Areas:

• Pour on to the inside of screen & spread using either a coating trough, plastic spatula or a piece of stiff card
• Remove any surplus from the reverse side of the screen
• Allow to dry – warm air will speed up the process
• For coarse meshes re-apply as necessary.

For spotting out:

• Examine screens for pin-holes. Use a brush or non-sharp instrument to apply a spot of filler to any pin-holes.  Apply to the print side.