The MagnaPrint® Discharge AB AW range together with Activator AB is a conventional ZFS based discharge system which gives excellent results, brilliant colour development and very soft handle on dischargeable fabrics.

DO NOT FLASH - This will cause an uneven discharge.

BASE AB AW Clear discharge base for strong, bright shades

BLENDING WHITE AB AW White discharge base for strong, bright shades

SUPER WHITE AB AW White discharge base for vibrant white.

The bases are fully compatible with each other and can be mixed in any ratio to achieve the required brightness of the print

KEY FEATURES

• Traditional ZFS discharge system

• Brilliant colour development

• Soft/minimal hand feel

APPLICATION

• Only suitable for use with dischargeable fabrics - always test new fabrics for suitability before printing

• Use Activator at 6% ratio to base ink & Eco-Pigments. Mix and leave 10 minutes for Activator to dissolve. Remix prior to printing

• Pot life up to 8 hours after activation (depending on room temperature) • Print wet-on-wet and avoid the use of flash units

• Discharge paste must penetrate into the fabric. If necessary reduce squeegee speed and increase pressure

• Always print whites in the last position

• Cure for 2½ - 3 min at 170°C (340°F)

Pigment: Up to 6% MagnaPrint Eco-Pigments