WPS and Panther Dryer Spares

Description

Replacement Parvalux SD1-0003/CONT Motor suitable for WPS / Panther Mini, 700 (including wide units) and 700L / 700LW tunnel dryers.

Replacement Parvalux PM10 Motor suitable for most 8000 series dryers.

Replacement Thermocouple

We sell a range of FTE (245 x 60 x 31mm) thermocouple elements suitable for Panther and other makes of dryers. Please make sure you choose the correct rated element (its normally written either on the front or back of the element). Use the selfie mode on your smart phone and take a picture of the element – quickest way to find out the rating.

We Stock: 300 / 400 / 500 / 600 / 650W Thermocouples

Replacement Elements

We sell a range of high quality ceramic elements manufactured in the E.U suitable for the Panther dryer and other makes of tunnel dryers which using infrared ‘long wave’ ceramic elements.
FTE (Full trough element) dimensions 245 x 60 x 31 mm.
When selecting replacement elements always make sure you choose the correct wattage elements. If you need advice and guidance please contact us.

We stock: 250 / 300 / 400 / 500 / 600 / 650 / 700W FTE Elements

We also stock a small selection of Square Elements and Thermocouples  (122 x 122 x 26mm) suitable for first generation Panther cub dryers and WPS Model 1 and 2 flash dryers.

Replacement Extractor Fans

Replacement Extractor Fan ZG2K108-AA01-40 suitable for Mini and 700 / 700L series WPS / Panther dryers.

Replacement Motor Controller Cards

Replacement F025 controller card – used to manage variable control for the Parvalux SD1 motor. Suitable for mini / 700 / 700WW / 700L / 700LW tunnel dryers. Please note that some Mini dryers and 8000 series use the F228 model of controller card (also available). Potentiometre included.
Wiring diagram will be issued on purchase.

Replacement K39 Temperature Controller

Suitable for 700 / 700W / 700L / 700LW/ 8000 series and Mini tunnel dryers. Please note the standard configuration is applied for a dryer configured with a Solid State Relay, if your dryer is using a mechanical relay (some Mini dryer and old Panther dryers) please let us know as the controller needs to be configured prior to shipping.
Wiring instructions included.

Replacement K49 Temperature Controller (also relaces CAL analogue controller)

Suitable for older 700 / 700W / 700L / 700LW/ 8000 series and Mini tunnel dryers. Please note the standard configuration is applied for a dryer configured with a Solid State Relay, if your dryer is using a mechanical relay (some Mini dryer and old Panther dryers) please let us know as the controller needs to be configured prior to shipping.
K49 can be used to replace analog CAL temperature controllers as used in Panther machines typically built before 2001
K49 can also be used to replace temperature controller on Wicked Printing Stuff and Art2screen print dryers.
Please call use prior to purchasing to ensure correct product is selected.
Wiring instructions included.

Celduc Single Phase Relay

Single Phase Solid State Relay, suitable for 700 SIngle Phase power dryers and some Mini Dryers (please note some have mechanical relays) Celduc 50amp 24-510 VAC, 3.5-32 VDC Input, LED, C/W Built in IP20 Cover.

Celduc Three Phase Relay

Three Phase Celduc Solid State Relay, Celduc 50amp, 24-510 VAC, 3.5-32 VDC input, LED, C/W Built in IP20 Cover. Suitable for three phase 700 and 8000 series WPS / Panther dryers. Please note that 8300 / 8240 / 8260 dryers may have higher amperage relays installed.

We can also supply replacement busbar, heat resistant cables, ceramics, MCBS, switches, buttons and controller fans.