Sericol Texopaque Classic OP Plastisol Ink Range

Category:

Description

Sericol Texopaque Classic OP incorporates Co-plus technology that minimises build up during printing. This significantly increases production output by reducing press down time, and helps to avoid spoilt garments due to defective printing. Gives a Soft Hand.

The proprietary chemistry used in the ink formulation allows Texopaque Classic OP to produce prints that have a soft handle, making the printed garments comfortable to wear.
PANTONE®* Matching System

Texopaque Classic OP inks have pre-matched formulations for the colours in the coated (‘C’ suffixed) section of the PANTONE® Colour Formula Guide. These formulations have been individually colour matched, and proof printed onto fabrics using commercial printing presses.

• High opacity
• Excellent wet on wet printability
• Good wash resistance
• Virtually unlimited screen stability
• Oekotex Standard 100 Class 2
• They give a soft hand
• High Opacity
• Minimum Build up on Press – incorporates Co-plus technology that minimises build up during printing. This significantly increases production output by reducing press down time, and helps to avoid spoilt garments due to defective printing.
• Phthalate Compliant
• Pantone Matching System
• Stencil: Use plastisol suitable emulsions such as Ulano Proclaim or Proclaim EC Epicure or Autosol 5000 or solvent resistant capillary film
• Squeegee: Typically 65 – 75 Blade
• Mesh: 32 – 120T (higher mesh counts when using Seritone)
• Cleaning: Standard or Biodegradable Screen Wash
• Curing: 160 C (90 – 160 seconds depending on equipment, colour, garment and ink deposit applied). Always wash test to test cure.

Fibrillation in Plastisols
Flash Cure printing of plastisols
Special Plastisol Inks and Additives
Flash Cure Whites
Texopaque Classic OP Data Sheet

Colours available in 1 Litre or 5 litre containers.

OP001 (S) Black
OP021 (S) White
OP025 Super Opaque White
OP042 (S) Seritone Yellow (Green Shade)/Light Chrome
OP045 Yellow
OP043 (S) Seritone Yellow (Red Shade)/Mid Chrome
OP101 Light Orange
OP162 (S) Seritone Orange/Light Red
OP165 (S) Seritone Magenta
OP166 (S) Seritone Violet
OP199 Warm Red
OP134 (S) Seritone Red (Yellow Shade)/Red
OP124 (S) Seritone Red (Blue Shade)/Deep Red
OP227 Light Blue
OP203 (S) Seritone Blue/Mid Blue
OP212 Blue
OP206 (S) Seritone Blue (RS)/Deep Blue
OP207 Navy Blue
OP283 Bright Green
OP320 Green
OP285 (S) Seritone Green/Deep Green

OP381 Extender Base (5 Litre container)

ZE591 Plastisol Flow Thinner (5 Litre container)
ZS640 Tursub (5 Litre container)

Please note that colour swatches are purely indicative.