Sericol MattPlast MG Ink Range


Sericol MattPlast MG is a highly opaque ink with exceptionally low odour and excellent printability, designed for use on PVC and other plastics.

Certain plastics may be impregnated with lubricants which, like plasticiser migration, may impair adhesion and block resistance even a considerable period after printing. This can be overcome by wiping the surface with White Spirit before printing. Surface adhesive left from protective papers on rigid PVC and acrylic sheets should be thoroughly removed in line with supplier’s instructions.

Certain plastics can become brittle when printed, possibly to the point of shattering, often only after several weeks. It is therefore essential to check compatibility between ink and plastic to guard against this problem.

Double-sided Stickers

MattPlast MG inks may be used to produce double-sided stickers. Prior to such use please consult your Fujifilm supplier. Owing to the complex nature of this type of work printers must satisfy themselves, before starting a production run, that their substrate and production method are compatible with the ink. MG500 Obliterating Grey is recommended as the barrier coat between the first and the second side.

Sericol MattPlast MG Info Sheet

Following colours are available:-

• MG001 Black
• MG009 Dense Black
• MG021 White
• MG023 Extra Opaque White
• MG041 (S) Light Yellow/Seritone Yellow (GS)
• MG080 (S) Mid Chrome/Seritone Yellow (RS)
• MG190 (S) Deep Orange/Seritone Orange
• MG191 (S) Vermilion/Seritone Red (YS)
• MG164 (S) Seritone Red (BS)
• MG165 (S) Seritone Magenta
• MG127 (S) Deep Violet/Seritone Violet
• MG230 (S) Seritone Blue
• MG233 (S) Seritone Blue (RS)
• MG325 (S) Seritone Green
• MG500 Obliterating Grey
• MG381 Extender Base
• MG030 Tinting White
• MG461 Rich Pale Gold
• MG462 Silver


ZC521 Thinner
ZC533 Retarder

Fluorescents – Use Plastipure Fluorescent FP screen inks

Universal Tinters
A range of non-fluorescent and fluorescent highly concentrated colour bases for tinting. The fluorescent colours are not recommended for use with MattPlast MG, but up to 10% of the non-fluorescent tinters may be added.